61MS

This type gives a comfortable circulating heat in the whole ship.

Type 61MS heats up to 25 m3 in the installing room and 50 m3 through the radiators in a well insulated ship.

62MS

Same stove as 62M, but with cooking plate, boil stand and copper coil for central heating.

66MV

Oil-saving model, ready for building-in. Totally insulated to eliminate any risk of fire. Heats only through water.

67MS

A larger oil stove for larger ships, larger rooms and spare time houses.

Type 67MS has copper spiral, for water flow. The stove is to be installed in the largest room. Total capacity: approx. 105 m3 in a well insulated room.

The stove gives 35 m3 and the radiators 70 m3.

NB!

For normal rise systems, a rise of 5 cm per running meters throughout the entire facility.

60M

The most suitable type for Danish fishing vessels.

We have much pleasure of this type – and that goes for thousands of fishermen in Denmark and abroad, too. This type is robust and reliable in the operation, and meet with the requirements for fishing vessels.

2000K and 2000KV

The oil stove type 2000K or 2000KV is a universal stove with a small window.

Through the small window your have the possibility of following the flames from the clean and soot free combustion. The stove is manufactured as a convection stove in order for the heat to distribute equally in the room.

62M

Type 62M. The effective stove for the boat heating.

An oil stove which in all details is characterised by solid preparation and solid safety of working.

71M/71MS

Stove, made of stainless steel. Cook-plate of cast iron, diameter 188 mm.

The stove has the Refleks gimbals, which secures pots etc. by sea.

66MW

Manufactured in polished stainless steel, copper or brass, with built-in regulator.
The 66MW is a further development of the popular oil stoves 66M and 66MK.

This model is designed for mounting on the bulkhead, and includes air space insulation for direct mounting.
The stove is very compact with a high output which can heat up to 20 m3 in an insulated vessel.

The 66MW has an air intake fitting in the base. This can be used: – To draw in fresh air from outside the vessel. Or: – If fitted with approximately one metre of pipe down to floor level, it will use this cooler air and give a more consistent heat around the whole cabin. Adequate ventilation to the cabin would be necessary).

The type 66MW is the reliable and economic heater for all vessel owners that appreciate stability and safety at sea.

66MK

A handy and economical model with a specially plane grinded hot plate of cast iron.

Type 66MK can also be delivered with copper coil for central heating system.